Loading... Please wait...

Shurflo 9300 Solar Well Pump Info

Click here to view, print, or download the Shurflo 9300 Solar Well Pump Info Sheet.pdf

The Shurflo 9300 Solar Well Pump is the affordable solution if you are looking for a solar well pump. Don’t be fooled by similar-looking but inferior well pumps from overseas. The Shurflo 9300 has proven itself over decades of use by homesteaders, preppers, ranchers, and weekenders for their off grid water system. Use it for gardens, livestock watering, pond aeration, remote homes, and cabins. This submersible pump will pay for itself in a few years, anywhere you are living off the grid. The simple, lightweight design of makes it easy to install in your well. Run it on two 60 or 90 watt solar panels at 24 volts, or run it on a deep cycle battery at 12 volts. See the Battery Operated Water Pump diagram. The optional pump controller will increase the pump output by up to 30%, and provides terminals for a float switch, which will turn the pump off when your tank is full. The correct submersible pump cable can help to keep your pump running trouble free.

  • Multi-Voltage: Runs on 24 volts at full power or 12 volts at half power
  • Fits well that are 4 inch diameter or larger
  • Power Cable can be detached by unscrewing a gland nut
  • Housing is corrosion proof plastic with stainless steel fasteners.
  • Can run dry without damage to the motor or pump head
  • Diaphragm Pump Head design is not sensitive to grit in the water. Comes with a 50 mesh intake screen to keep out leaves and bugs.  
  • Will pump to 230 feet. Maximum depth under water is 100 feet.
  • Provides approximately 1.2 gallons per minute at 45 psi, 1 gpm at 90 psi.
  • Easily disassembled for overhaul with simple hand tools, ideal for homesteaders living off the grid
  • Parts are in stock at High Lifter Pump Service
  • Not to be used to pump any petroleum product, solvent, thinner, or where flammable vapors are present.
  • Rated for potable water
  • 1/2” Hose Barb output fitting
  • Optional Pump Controller 902-100 provides float switch connections and is 24VDC only.
  • Optional Pump Controller 902-200 provides float switch connections, low water sensors, and is 24/12VDC voltage selectable.
  • Weight 5 lbs.

Buy Shurflo 9300 Solar Well Pump

How to Use a Submersible Water Pump - 24 Volt Wiring Diagrams

Diagram Showing Working of Solar Water Pump with Well Level Sensors

Shurflo 9300 Submersible Pump Installation Instructions

Shurflo 9300 Solar Well Water Pump System - Output Chart for 12 or 24 Volt installation

Shurflo 9300 Solar Well Pump Owner's Manual 911-415 Rev L 06-12

Linear Current Booster LCB-GO 902-100 Solar Water Pump Controller Installation Instructions

Linear Current Booster LCB-G 902-200 Solar Well Pump Controller with Water Level Sensors - Installation Instructions

Shurflo 9300 Submersible Pump Tech Info


Shurflo 9300 Submersible Pump Wiring Diagram (Schematic)
Shurflo 9300 Submersible Pump Data
Model Shurflo 9325-043-101
Description 24 VDC Submersible Pump for potable water wells with 1/2” Hose Barb output port and 50 mesh stainless steel input screen
Vertical Lift (feet) 20 60 100 140 180 230
Vertical Lift (meters) 6 18 31 44 55 70
Flow (GPH) 111 105 100 93 87 79
Flow (LPH) 420 398 379 352 329 300
Solar Array Minimum Watts 58 78 99 115 135 155
Current in Amps 1.7 2.3 2.9 3.5 4.0 4.6